BLURAY ACRYLIC SOFT TOUCH EMULSION

TYPE
Bluray Acrylic Soft touch emulsion provides a luxurious finish and a silky glowing appearance to the wall.
FEATURES
Bluray soft touch emulsion is water based, 100%acrylic, interior wall finish. It has a silky sheen finish which lends a soft regal glow to the interiors of the room. It has excellent flow giving a near brush mark free finish. It offers high stain resistance. Wall painted with Soft touch are easy to clean and maintained the new look for years. Soft touch also offers good anti-fungal properties.
RECOMMENDED APPLICATION
Bluray Acrylic Soft touch emulsion is an interior wall finish that can be applied on all type of smooth plaster, false ceiling, asbestos sheets, concrete etc.
PRODUCT TECHNICAL DATA
COLOURS
White & other shades as per shade cards
FINISH
Smooth and Matt
COVERAGE
On smooth primer masonry surface by brushing
1 coat: 25-30 sq. mtr/ltr
2 coats: 14-16 sq mtr/ltr
(It may vary from the quoted coverage to factor such as method and condition of application and surface roughness)
DRYING TIME
Surface drying time – 15-25 minutes
GLOSS LEVELS/SHEEN LEVELS
Silky smooth sheen
FLASH POINT (IS101/108 Part 1, Sec 9)
Non- flammable
SUITABILITY OF THINNER PAINT
Use within 24 hrs.
SHELF LIFE
3 years from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat.
PERFORMANCE DATA
ABRASION RESISTANCE
Excellent
WATER RESISTANCE
Excellent
SHELF LIFE
3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
REMARKS
a) Kindly refer to the MSDS for the Bluray Paints Bluray Acrylic Soft touch emulsion which gives detailed information on Safety measures while handling the paint.
b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire.
c) Avoid eye and skin contact. In case of eye and skin contacts, wash with plenty of clean water.
d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention.
e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling the paint.
f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system.
g) Do not apply when ambient temperature is less than 10ºC or if the temperature might drop to this level within 4 hrs of application.
h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use.
i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
APPLICATION METHOD
Product Thinner Dilution % by Vol Application Viscosity in Sec Recoating Period (Hrs)
Sand the surface with emery paper No.100 and wipe        
Bluray's Cement (Water or Solvent based) Wall Primer MTO or Water B- 8-10
S- 15-20
B-30-40
S-20-25
6-8 hrs
Bluray's Wall Putty Water Small amount of water flow   4-6 hrs
Sans the Surface with emery paper and Wipe        
Bluray's Cement (Water or Solvent based) Wall Primer MTO or Water B- 8-10
S- 15-20
B-30-40
S-20-25
6-8 hrs
Sand the surface with emery paper No. 320 and wipe        
Bluray’s Acrylic Soft touch emulsion by Brush, Spray, Roller Water B-40-45
S-65-70
B-30-45
S-20-25
3-4 hrs
Bluray's Acrylic Soft touch Emulsion by Brush, Spary, Roller Water B-40-45
S-65-70
B-30-45
S-20-25
3-4 hrs
(B=Brushing, S=Spraying)
Safety Features : Non-flammable
Pack Sizes: 500ml, 1 Litre, 4 Litre, 10Litre, 20 Litre.

Top