BLURAY AIR DRYING CHEMICAL RESISTANCE EPOXY PRIMER

TYPE
Two pack Air Drying Epoxy primer with Anticorrosive Pigments & Cured with Amido-amine Hardener.
FEATURES
Base and Hardener packed and supplied separately. To be over coated with a suitable Epoxy finish to give a highly Anticorrosive and Chemical resistance coating.
RECOMMENDED USE
High performance primer for protection of Steel Structures, Tanks, Machinery, equipments etc., from corrosive/marine atmosphere .Ideal for petrochemical and offshore/onshore installation, chemical units, and for the equipments. (For more information please refer to epoxy compositions and their application).
PRODUCT DATA 
COLOURS
Red Oxide, Buff & Grey
FINISH
Smooth & Finish
DRYING
Surface Dry : 1-1.5 Hrs.
Hard Dry : Overnight
Over Coating : Overnight
Full Cure : 7 Days

APPLICATION
MIXING RATIO
(BY VOLUME)
BASE:HARDENER 3:1
MATURATION TIME
30 Minutes
POT LIFE
(OF MIXTURE)
6 TO 8 Hrs
RECOMMENDED D.F.T.
30-35 Microns
APPLICATION
By Spray or Brush
THINNER
Epoxy ThinnerST-13
FLASH POINT
Above 26C
THEORITICAL
SPREDING RATE
11.5 –13.50 Sq.M/Ltr per Coat at above D.F.T.
PRECEDING COAT
None
SUCCEEDING COAT
Air Drying Epoxy Enamel, Epoxy Enamel HB, Epoxy MIO, Or any other recommended Finish Coat.
PERFORMANCE DATA
SHELF LIFE
6 Months in separate sealed packs at normal ambient Temperatures.
REMARKS
1. See note on Epoxy Compositions.
2. Stir the components well before mixing them in the specified ratio.
3. See note on Surface preparation for best performance on the coating system.
PACKING 20 Ltrs, 4 Ltrs and 1 Ltr.
Top