TYPE |
Epoxy Resins & Anticorrosive Zinc Phosphate Pigment cured with Adduct Hardener. |
| FEATURES |
TWO PACK Air Drying Epoxy Primer with Base and Hardener packed and supplied separately. Excellent adhesion on ferrous and non ferrous metals like Al,GI,Tin .
To be overcoated with a suitable Epoxy/ PU finish giving a highly Anticorrosive and Chemical resistance coating. |
| RECOMMENDED USE |
High performance primer for steel structures in corrosive atmospheres like Chemical Plants, On shore & Off shore Installations, Ships, and Nuclear Installation etc. (For more information please refers to epoxy compositions and their application). |
| PRODUCT
DATA |
| COLOURS |
Off White, Grey |
| FINISH |
Smooth & Matt |
| FLASH POINT |
Above 26°C |
| DRYING TIME |
Surface Dry : 1-1.5 Hrs.
Hard Dry : Overnight
Over Coating : Overnight
Full Cure : 7 Days. |
| APPLICATION |
| MIXING RATIO |
BASE:HARDENER
3 : 1 |
| MATURATION TIME |
30 Minutes |
| POT LIFE AT 30°C |
6 TO 8 Hrs |
| APPLICATION |
By Spray or
brush. |
| THINNER |
Epoxy Thinner ST-13 |
| RECOMMENDED DFT |
30-35 Microns |
THEORITICAL
SPREDING RATE |
11.5 –13.50 Sq.M/Ltr per Coat at above D.F.T. |
| PRECEDING COAT |
None |
| SUCCEEDING COAT |
Air Drying Epoxy Enamel, Epoxy Enamel HB, Epoxy MIO, Or any other recommended top Coat. |
| PERFORMANCE
DATA |
| SHELF LIFE |
6 Months in separate sealed packs at
ambient Temperatures. |
| REMARKS |
1. See note on Epoxy Compositions.
2. Stir the components well before mixing them in the specified ratio.
3. See note on Surface preparation for best performance on the coating system. |
| PACKING |
20 Ltrs. 4 Ltrs
and 1 Ltr. |
|
Top |
