Two pack Air Drying Epoxy primer with Anticorrosive Pigments & Cured with Amido-amine Hardener.

Base and Hardener packed and supplied separately. To be over coated with a suitable Epoxy finish to give a highly Anticorrosive and Chemical resistance coating.

High performance primer for protection of Steel Structures, Tanks, Machinery, equipments etc., from corrosive/marine atmosphere .Ideal for petrochemical and offshore/onshore installation, chemical units, and for the equipments. (For more information please refer to epoxy compositions and their application).

Red Oxide, Buff & Grey

Smooth & Finish

Surface Dry : 1-1.5 Hrs.
Hard Dry : Overnight
Over Coating : Overnight
Full Cure : 7 Days

BASE:HARDENER 3:1

30 Minutes

6 TO 8 Hrs

30-35 Microns

By Spray or Brush

Epoxy ThinnerST-13

Above 26C

11.5 –13.50 Sq.M/Ltr per Coat at above D.F.T.

None

Air Drying Epoxy Enamel, Epoxy Enamel HB, Epoxy MIO, Or any other recommended Finish Coat.

6 Months in separate sealed packs at normal ambient Temperatures.

1. See note on Epoxy Compositions.
2. Stir the components well before mixing them in the specified ratio.
3. See note on Surface preparation for best performance on the coating system.