TYPE |
High Quality Pigments and Epoxy Resins cured with Adduct Hardener. |
| FEATURES |
To be used as
a finish coat on Epoxy Primer for protection of steel structures,
Concrete or Wood, Equipment, Tanks, Machinery etc., from corrosive
atmosphere in chemical factories, Saline environments etc. |
| RECOMMENDED USE |
It is an ideal coating for Petrochemical units, Fertilizer, Sugar, Textile, Paper & other factories, Nuclear Establishments, Hydroelectric Projects, On
shore and Off shore Installation.
(For more information refer to Epoxy Compositions and their applications). |
| PRODUCT
DATA |
| COLOURS |
As per BLURAY’S
High Performance Shade Card. |
| FINISH |
Smooth &
Glossy |
| DRYING |
Surface Dry
: 3-4
Hard Dry : Overnight
Over Coating : Overnight
Full Cure : 7 Days |
| APPLICATION |
MIXING RATIO
(BY VOLIUM) |
BASE:HARDENER
3 : 1 |
| MATURATION TIME |
30 Minutes |
POT LIFE
(OF MIXTURE) |
6 TO 8 Hrs |
| RECOMMENDED D.F.T. |
30-35 Microns |
| APPLICATION |
By Brush or Spray |
| THINNER |
Epoxy Thinner
ST-13 |
| FLASH POINT |
Above 26 Deg.C |
THEORITICAL
SPREDING RATE |
11.5 –
13.5 Sq.M/Ltr per Coat at above D.F.T.
(depending on shade) |
| PRECEDING COAT |
A suitable Epoxy
Primer or Epoxy Zinc Rich Primer |
| SUCCEEDING COAT |
Generally none,
Depends on specification. |
| PERFORMANCE
DATA |
| SHELF LIFE |
6 Months in
separate sealed packs at normal ambient Temperatures. |
| REMARKS |
1. See note
on Epoxy Compositions.
2. Stir the components well before mixing them in the specified
ratio.
3. Follow note on Surface Preparation for best performance of
the coating System.
|
| PACKING |
20 Ltrs. 4 Ltrs
and 1 Ltr. |
|
Top |
