TYPE |
Epoxy Resins and Micaceous Iron Oxide Pigment. |
| FEATURES |
Two pack Air Drying Epoxy High Build Coating, Micaceous Iron Oxide (MIO). Imparts the property of a barrier coating & hence it has very high resistance to Humidity, Saline atmosphere, water, polluted industrial environments & had excellent exterior durability. |
| RECOMMENDED USE |
Heavy duty finishing coat for structural steel in Chemical & fertilizer Plants, refineries, Petrochemical Complexes, Mines, Thermal Power Plants, Bridges etc. It can also act as an intermediate coat for epoxy in marine and offshore installations with suitable topcoat. |
| PRODUCT
DATA |
| COLOURS |
Dark Grey |
| SPECIFIC GRAVITY |
1.6 + 3% |
| VISCOSITY |
Thixotropic |
| FINISH |
Smooth &
Matt |
DRYING
|
Surface Dry:
2-3 Hrs
Hard Dry: Over Night.
Over Coating: Over Night
Full Cure: 7 Days |
| FLASH POINT |
Above 26°C |
| APPLICATION
DATA |
MIXING RATIO
( BY VOLUME) |
BASE : HARDENER
3 : 1 |
| MATURATION TIME |
30 Minutes |
POT LIFE
( OF MIXTURE) |
6-8 Hrs |
| RECOMMENDED DFT |
75-80 Microns |
| APPLICATION |
By Airless Spray
or Brush. |
| THINNER |
Epoxy Thinner
ST-13 |
| PRECEEDING COAT |
Super Epoxy
Primer, Zinc Rich Epoxy Primer or Inorganic Zinc Silicate Primer. |
| SUCCEDING COAT |
Epoxy or P U top coats |
| PERFORMANCE
DATA (after Full cure as a system) |
| THEORETICAL SPREDING RATE |
7 Sq. M/Lt. Per Coat at 75-80 microns D.F.T |
| SHELF LIFE |
6 Months in separate sealed packs at normal ambient Temperatures. |
| REMARKS |
Stir the components well before mixing the Specified ratio. Ensure that the surface is clean. See note on Surface Preparation and Epoxy Compositions. |
| PACKING |
20 Ltrs and
4 Ltrs. |
|
Top |
