TYPE |
Based on Epoxy Primer with heavy loading of Fine Zinc Dust. |
| FEATURES |
Excellent Primer for Structural steel having very high corrosion Resistance in Marine & Industrial Environments. |
| RECOMMENDED USE |
Suitable primer for Water Pipelines, Penstocks, Sluice Gates, Crest Gates etc., in Hydel Projects, Floating Roof Tanks, Structural Steel in
Docks, Refineries, Thermal Plants, Chemical Factories etc., Suitable as a weldable shop primer in ship building industry.
|
| PRODUCT
DATA |
| COLOURS |
Grey |
| FINISH |
Smooth & Matt |
| DRYING |
Surface Dry
: 90Minutes.
Hard Dry : Overnight
Track Free : 3-4 Hrs.
Over Coating : Overnight.
Full Cure : 7 Days |
| APPLICATION |
MIXING RATIO
(BY VOLIUM) |
BASE:HARDENER
3 : 1 |
POT LIFE
(OF MIXTURE) |
6 TO 8 Hrs |
| RECOMMENDED D.F.T. |
40 Microns |
| SURFACE PREPARATION |
Sand or shot
blasting to Sa 2 ½ Swedish Specification or equivalent. |
| APPLICATION |
By Brush or
Air less Spray. |
| THINNER |
Not normally
required. If required use ST-13 |
| FLASH POINT |
Above 24 Deg.C |
THEORITICAL
SPREDING RATE |
10 Sq.M/Ltr
per Coat at 40 Microns D.F.T. |
| PRECEDING COAT |
Nil |
| SUCCEEDING COAT |
Epoxy Enamel, Epoxy Enamel HB, Epoxy MIO, Chlorinated Rubber Paints Or any other recommended System |
| PERFORMANCE
DATA |
| CORROSION RESISTANCE |
Excellent |
| SALT SPRAY RESISTANCE |
Excellent |
| SHELF LIFE |
6 Months in
separate sealed packs at normal ambient Temperatures. |
| REMARKS |
1. See note on Epoxy Compositions.
2. Power stirring is recommended to get a uniform mixing.
3. Follow note on Surface Preparation for best performance.
4. Continues stirring is recommended while in use to get uniform coating
5. Proper Surface Preparation as mentioned above is a must to get the best result.
|
| PACKING |
4 Ltrs |
|
Top
|
