| |
|
Bluray plast coats are formulated with
superior grades of Thermoplastic Acrylic Resins. In combination
of suitable plasticiser and additives, to have excellent adhesion
on various substrate as Acrylics, PS,HIPS , ABS etc. These give
very hard and tough film with excellent mar resistance. |
| |
|
|
System : |
Single pack |
| Viscosity : |
45-55 sec on FCBY |
| S.G : |
0.95 + or - 0.03 |
| Method of Application : |
By Spraying |
| Thinner recommended : |
Bluray Acrylic Thinner |
| Thinner required |
150-200 % by Volume |
| Drying : |
S.D -5-10 Mts
H.D Less than one hour |
| Gloss : |
Matt , Eggshell, Semi-glossy |
| Shade : |
Available in Metallic and Solid colours. |
| |
|
| PROCEDURE : |
The surface which is to be painted should
be free from dust grease, mold release agents. It should not
have electrostatic charge on the surface. Clean the surface
with proper cleaner very fine sand paper may be used to prepare
surface uniform. Apply one coat of Bluray plast coat. Allow
to dry for 15 to 20 minutes. A second coat is to be applied
to get more uniform surface. |
| |
|
| USES |
For molded plastics where more tough durable
and decorated film is required Such as cabinet's of (T.V, Transistor,
Radio, Stereo ,Computers) Calculators, Telephones Toys etc. |
| PACKING |
4 ltr, 20 ltr |
| Notes : |
| 1 |
Don't inhale the
vapours of P.U. |
|
2 |
All information
gives in this sheet are accurate to the best of our knowledge,
no warranty given and no liability is accepted in respect
of such information as conditions of applications are
beyond our control. |
|
