This is designed to use as clear coat on basecoat. It is fast setting clear coatwith very good adhesion property on these surface. It has good mar proofness & goog hardness. Its final coat needs polishing to get a smooth & even finish with high gloss & durablity.
PRODUCT
DATA
COLOURS
Clear Transparent
MIXING RATIO
Single Pack
FINISH
Smooth, Glossy
RECOMMENDED DFT
15 - 25 micron
SURFACE PREPARATION
All surface to be coated should be clean, dry & free from contamination. Oil & grease should be removed in accordance with SSPC-SP-1. Proper/suitable cleaning procedure should be followed depending up on the quality of the surface painted.
For basecoats - Clean the surface to be painted, then apply this clear over it in two-three coats.
DRYING
1. Surface dry – 5 - 10 mins.
2. Dry to handle – 1 - 2 hrs.
3. Hard dry – o/n
4. Full cure – 7 days.
Flash Point
< 14°C
APPLICATION DATA
APPLICATON
By Conventional Spray
PAINT PREPARATION
Mix the content by suitable strirrer, add recommended thinner & mix this till homogenous. Strain the material through 300# mesh before application
RECOMMENDED THINNER
NCT Thinner
THINNER INTAKE
By Conventional spray - 10 - 40% by vol
APPLICATION VISCOSITY
18 (+ OR -)2 SEC BY FC B# 4AT 30°C
PERFORMANCE DATA (after Full cure as a system)
ADHESION
passes
SCRATCH HARDNESS
good
SHELF LIFE
6 months in a closed container at normal room temperature
