Product Type-
An air drying cum forced drying product based on Alkyd Resin. Outdoor
durability is excellent. Uses- This product is
a premium quality finish designed for spray application. It can also
be used as Touchup for Stoving Top Coats. Typical end uses are on
tractors and Auto Rickshaws.
PROPERTIES
Colour
Range
A wide
range of colour is available
Gloss level
Gloss range from
Semi-glossy (40- 60/60º) to full gloss (80/20º).
Abrasion
Resistance
Moderate
Flexibility
Excellent, passes 6mm diameter rod Mandrel
Impact Resistance
Excellent
Hardness
Good after 24 hours, air drying or fore drying
(130º C for 30 minutes)
Durability
Excellent upto 1 year exposure facing 45º
South
Package viscosity
Min. 60"/B4/30ºC
Theoretical
Spreading Rate
15-18m2/litre (at 20 micron DFT)
Weight Solids
30-40%
Shelf Life
9 months from the date of manufacture
Dry Film
Build
20 micron/coat
PROCESS INFORMATION :
Surface Preparation
A properly cleaned,
pretreated (conversion coating) and final rinsed metal surface
is necessary in order to obtain optimum physical and resistance
properties.
Paint Systems
A suitable
primer (preferably QDS) Primer) must be used for satisfactory
adhesion and corrosion resistance.
APPLICATION
Substrate
Correctly
cleaned, pretreated and primed metal
Method
By spray, conventional
or electrostatic
Cure
Air drying Surface
dry 20 min.
Tack-Free 2 hour
Hard dry Overnight
Force drying 100-110ºC/30 min
Repair Touch
up
Touch up should be
done after 72 hours
Equipment
clean up
Chemilac Thinner
Transportation
(Wt/L : 0.96-1.08
kg/litre)
Dangerous good class/Flash point : 3/26ºC
