Heat curing alkyd/amino resin
based products which meet stringent specification requirement of refrigerator
Industries.
These products are a premium quality finishes designed for spray application.
It offers outstanding durability and excellent post-fabrication performance.
Typical end uses are refrigerators, washing machines, air conditioners
etc.
PROPERTIES
Colour
Range
A varied
colour range is available
Gloss Level
Gloss > 55 at
45º
Abrasion
Resistance
Excellent
Flexibility
Passes 6 mm diameter and Mandrel
Hardness
Excellent, (H-Pencil)
Durability
Outstanding, when applied and baked as specified.
They should offer a service life in excess of 7 years in residential
environments. They have excellent chemical and corrosion resistance
property.
Package Viscosity
Min. 60"/B4 /30ºC
Theoretical
Spreading Rage
15-18 M2/Litre (at 20 micron DFT)
Weight Solids
52-60% (varies from colour to colour)
Volume Solids
30-40% (varies from colour to colour)
Shelf life
6 months from the date of manufacture
Dry Film
Build
22-25 micron/coat (varies from colour to colour)
PROCESS INFORMATION :
Surface
Preparation
A property
cleaned, pretreated (conversion coating) and finalized metal
surface is necessary in order to obtain optimum physical and
resistance properties.
Paint System
A suitable epoxy
primer must be used for satisfactory adhesion and corrosion
resistance.
APPLICATION
Substrate
Correctly
cleaned, pretreated and primed metal.
Method
By spray conventional
or electrostatic
Cure
120ºC 30 minutes
(Effective metal temperatures EMT)
Repair Touch-Up
Bluray Acrylic/N.C.
Finish.
Equipment
Clean Up
Stoving Thinners
(depends on mode of application)
Health and
Safety precautions
Refer attached "Material
Safety Data Sheet"
Transportation
(Weight/L) 1.08-1.18
kg/litre (will vary from colour to Colour Dangerous goods class/flashpoint
3/26ºC
