GENERIC TYPE : |
Two Component |
|
COMPOSITION : |
Aliphatic polyurethane - based Top Coat.
Clear or suitably Pigmented |
|
RECOMMENDED USE : |
Recommended for use in chemical plants, fertilizer
plants, petrochemical complexes and wherever high chemical resistance
with obrasion resistance and decorative finish are required
i.e. bulk storage tanks, plants, equipment, structures etc.
orignal equipment coating, hygienic wall coating. This product
is having very good resistance against chlorine & weathering
very good gloss retention property in UV rays also. |
|
PHYSICAL CONSTANTS : |
|
|
Color |
Assorted Shades
|
Finish |
Glossy/Semi Glossy/Matt
|
Solids by volume |
40% |
Theoretical Spreading
Rate |
13.3 sq. mtr.
/ ltr. at 30 microns D.F.T. on smooth and non-absorbent
surface. |
Flash Point |
Above 25 deg.
C. |
Drying Characterstics
|
DRY TO TOUCH : 1-1 1/2 hrs.
at 25deg.C.
DRY TO HANDLE : 24 hrs.
FULLY CURED : 7 days |
Shelf Life |
9 months (of individual
component) - Stored under proper condition of temp.
& pressure. |
|
APPLICATION DETAIL : |
|
|
Mixing Ratio (BY
VOL.) |
Base : Hardner-
3 : 1 |
Pot life |
6 - 8 hrs. at
25 deg. C. |
Application method |
By Brush or By
Spray |
Thinner |
BlurayThinner |
Recommended dry
film Thickness |
30 microns |
Overcoating interval |
MIN. : 8 hrs. MAX.
: 24 hrs. |
Compatibility |
Can be applied
on Epoxy and Polyurethane Primers. |
|
SURFACE PREPARATION : |
Please refer our directive sheet on surface
preparation. |
|
FILM PROPERTY CHEMICAL RESISTANCE : |
|
EXPOSURES-SPLASH
&SPILLAGE-FUMES |
ACIDS |
VGood |
VGood |
ALKALITES |
VGood |
Excellent |
SOLVENTS |
VGood |
Excellent |
SALTS |
VGood |
Excellent |
WATER |
VGood |
Excellent |
|
|
TEMPERATURE RESISTANCE
: |
CONTINUOUS : 93 deg. C.
INTERMITTENT : 120 deg.C. |
WEATHERABILITY
: |
Excellent |
FLEXIBILITY : |
Excellent |
ABRASION RESISTANCE
: |
Excellent |
|
Notes : |
1 |
Do not apply when
temperature falls below 10 deg. C. or rises above 50 deg.
C. and when relative humidity rises above 90%. Do not
apply during rain, fog and mist. |
2 |
Brushes and spray
equipment should be cleaned with Chemilac's Thinner other-wise
equipment is liable to be damaged. |
|
Pack Size : |
20 Litres, 4 Litres |