BLURAY EPOXY OFF- WHITE ( TL)

TYPE
Based on Epoxy Resin and high quality pigment and cured with modified adduct hardener.
FEATURES
A “two pack”air drying High Build Coating with Base & hardener packed and supplied separately. High Build / High performance finished coat to be applied over Super Epoxy Surface Tolerance primer with excellent resistance to corrosion and chemicals.
RECOMMENDED USE
As a High Build Epoxy system Top coat to withstand rigorous conditions in
Chemical factories, petrochemical plants and refineries. More specifically recommended in Tank Lining system for Transportaion of Solvents etc. System comprised of Super Epoxy Surface Tolerance Primer ( DFT 80 – 120 µ ) followed by 2 coats of Super Epoxy Off-whiteTL ( DFT 180 – 200 µ)
PRODUCT DATA 
COLOURS
Off – White
SPECIFIC GRAVITY
1.65 ± 0.03
VISCOSITY
Thixotropic
FINISH
Smooth with Sheen
DRYING TIME ( AT 30°C/ RT /70%rh)
Surface Dry : 20 – 40 mints
Tack Free : 2 – 3 hrs.
Hard Dry : Overnight
Full Cure : 7 days
FLASH POINT
Above 23°C
APPLICATION DATA
MIXING RATIO
( BY VOLUME)
BASE:HARDENER
   4    :     1
MATURATION TIME
30 Minutes
POT LIFE AT RT
5 – 6 hrs
RECOMMENDED
DFT / COAT
80 – 120 µ
APPLICATION
By Airless Spray / Spray
THINNER
RECOMMENDED
Epoxy Thinner ST – 13
PRECEEDING COAT
Super Epoxy Surface Tolerance primer
PERFORMANCE DATA (after Full cure as a system)
COVERING CAPACITY
4–5 sq. mtrs/ltr at 100 µ DFT
CHEMICAL RESISTANCE
Passes MIBK, IPA, IPA / Water (mix.), Diesel, Petrol, Methanol, Xylene, Lubricating Oil, Brake Oil
SHELF LIFE
6 months in separate sealed pack at RT.
REMARKS
1. Please refer note details on surface preparation, precaution from Tec. Literature on Epoxy composition.
2. While using Super Epoxy Surface Tolerance Primer, use Epoxy / PU Dark Shade or Off- White. There is possibility of Brown Colour migration from hardener component of Primer to top coat, however this discoloration of Top Coat does not have any detrimental Effect on performance.
3. Stir the component well before mixing them. Apply over on clear recommended primer. Mix. Hardener component in specified ratio.
4. Close container properly, in case of partial use.
Top