BLURAY AIR DRYING CHLORINATED RUBBER M.I.O. COATING

TYPE
Based on Chlorinated Rubber Resin & Highly Anti Corrosive Micaceous Iron Oxide Pigments.
FEATURES Chlorinated Rubber Paint Micaceous Iron Oxide has excellent resistance to moisture and Saline conditions and is chemically polluted environments. Highly suited for exterior use and can also be used as an intermediate coat/barrier coat.
RECOMMENDED USE For Docks, Bridges other Harbor and Port Installations, Structures in Chemical Factories like Fertilizer, Textile Paper Dyes etc., in sewage plants and other similar units.
PRODUCT DATA 
COLOURS Dark Grey
FINISH Smooth with slight luster
GLOSSY Egg Shell/Matt
DRYING Surface Dry: 15 Minutes
Hard Dry: Over Night.
Over Coating: Min 16 Hrs.
Max: No Limit.
FLASH POINT Above 26°C
APPLICATION DATA
APPLICATON By Spray or Brush
THINNER If required use Thinner ST-15
RECOMMENDED DFT 50-75 Microns
PRECEEDING COAT Super Air Drying Chlorinated Rubber Primer, Super Epoxy Primer or Inorganic Zinc Silicate Primer.
SUCCEDING COAT If required Super Air Drying Chlorinated Rubber Paint (normal or High Build)
PERFORMANCE DATA (after Full cure as a system)
THEORETICAL SPREDING RATE 6-9 Sq. M/Lt. Per Coat Above D.F.T
CORROSION RESISTANCE Excellent
WATER RESISTANCE Excellent
SALT SPRAY RESISTANCE Excellent
CHEMICAL RESISTANCE Good
SHELF LIFE 6 Months in separate sealed packs at normal ambient Temperatures.
REMARKS Stir well before use.Apply on a properly prepared & primed surface.
PACKING 20 Ltrs, 4 Ltrs
Top