ETCH PRIMER

 
GENERIC TYPE Two Component.
COMPOSITION Vinyl Butaryl Resin with rust inhibitive pigmented.
RECOMMENDED USE Recommended for use on aluminium, galvanized surface for etching for better adhesion of subsequent primer. It is recommended on M.S. also for better adhesion of coating system.
 
PHYSICAL CONSTANTS
 
Colour Yellow
Finish Flat
Solids By Volume Not Relevant
Theoretical Spreading Rate 12 - 13 sq.mtr./ltr. at recommended D.F.T. on smooth and non absorbent surface.
Flash Point Above 25 deg. C
Drying Characteristics Drying Characteristics
DRY TO TOUCH : 20 - 30 minutes
DRY TO HANDLE : 8 hrs.
FULLY CURED : Overnight
Shelf Life 9 months (of individual component) - Stored under proper condition of temp. & pressure.
Thinner Recommended Bluray G.P. Thinner
Finish / Gloss Smooth & Matt
Acid Alkali (2%) Resistance Good
Scratch Hardness 2000 Grams
   
NOTE All information gives in this sheet are accurate to the best of our knowledge, no warranty given and no liability is accepted in respect of such information as conditions of applications are beyond our control
   
USES For Electric oven, Furnace Boilers, Auto Silencers etc.
NOTE All information given in this sheet are accurate to the best of our knowledge, no warranty is given and no liability is accepted in respect of such information as conditions of applications are beyond our control.