BLURAY EPOXY SURFACE TOLERANCE PRIMER( TL)

TYPE
Based on modified Epoxy Resin and Anticorrosive Pigments and cured with Phenalkamine hardener composition.
FEATURES A “two pack” air drying Epoxy Primer with Base & hardener packed and supplied separately. To be overcoated with suitable Epoxy Finish Top coat to give a high anti-corrosive & Chemical Resistant coating. Can be overcoated with PU system. Top Coat, epoxy or PU should be dark colour and not White/Pale shade ( refer foot-note)
RECOMMENDED USE As a High Performance High Build Primer, which has some degree of tolerance in surface preparation( very slight rusty, contaminant surface) in steel structure in highly corrosive atmosphere like chemical plants. Ideally suited inTank Lining systems for transportation of solvents etc.
PRODUCT DATA 
COLOURS Grey
SPECIFIC GRAVITY 1.60 ± 0.02
VISCOSITY Flowable, Thixotropic Primer
FINISH Smooth and Matt
DRYING TIME ( at 30°C/ RT / 70%RH)
Surface Dry : 60 – 75 mints
Tack Free : 4 – 6 hrs.
Hard Dry : Overnight
Overcoating : After 20 hrs., or within 48 hrs.
Full Cure : 7 days
FLASH POINT Above 23°C
APPLICATION DATA
MIXING RATIO
( BY VOLUME)
BASE : HARDENER
   4    :     1
MATURATION TIME 30 Minutes
POT LIFE aT RT 6 – 7 hrs
RECOMMENDED
DFT / COAT
80 – 120 µ
APPLICATION By Airless Spray / Spray
THINNER
RECOMMENDED
Epoxy Thinner ST–13/ST-20
PRECEEDING COAT Super Epoxy Off- White( TL) / Superpol PU Dark Shade
PERFORMANCE DATA (after Full cure as a system)
COVERING CAPACITY 4–5 sq. mtrs/ltr at 100 µ DFT
SCRATCH HARDNESS More Than 2500 Grams
FLEXIBILITY ¼” mandrel - pass
ADHESION Pass ( 2 X 2 mm)
CORROSION RESISTANCE Excellent
SALT SPRAY RESISTANCE More Than 500 hrs
CHEMICAL RESISTANCE Passes MIBK, IPA, IPA / Water (mix.), Diesel, Petrol, Methanol, Xylene, Lubricating Oil, Brake Oil
SHELF LIFE 6 months in separate sealed pack at RT.
REMARKS 1. Use Top coat of Epoxy/PU with dark/Off white shade. There is possibility of Brown Colour migration from hardener. However this discoloration of Top Coat does not have any detrimental Effect on performance.
2. See note on Surface preparation from Epoxy Composition Tech. Literature to get best performance from coating system.
3. Stir the component well before mixing them. Apply over on clear recommended primer. Mix. Hardener component in specified ratio.
4. Close container properly, in case of partial use.
Top

BLURAY AIR DRYING CHEMICAL RESISTANCE EPOXY PRIMER

TYPE
Two pack Air Drying Epoxy primer with Anticorrosive Pigments & Cured with Amido-amine Hardener.
FEATURES
Base and Hardener packed and supplied separately. To be over coated with a suitable Epoxy finish to give a highly Anticorrosive and Chemical resistance coating.
RECOMMENDED USE
High performance primer for protection of Steel Structures, Tanks, Machinery, equipments etc., from corrosive/marine atmosphere .Ideal for petrochemical and offshore/onshore installation, chemical units, and for the equipments. (For more information please refer to epoxy compositions and their application).
PRODUCT DATA 
COLOURS
Red Oxide, Buff & Grey
FINISH
Smooth & Finish
DRYING
Surface Dry : 1-1.5 Hrs.
Hard Dry : Overnight
Over Coating : Overnight
Full Cure : 7 Days

APPLICATION
MIXING RATIO
(BY VOLUME)
BASE:HARDENER 3:1
MATURATION TIME
30 Minutes
POT LIFE
(OF MIXTURE)
6 TO 8 Hrs
RECOMMENDED D.F.T.
30-35 Microns
APPLICATION
By Spray or Brush
THINNER
Epoxy ThinnerST-13
FLASH POINT
Above 26C
THEORITICAL
SPREDING RATE
11.5 –13.50 Sq.M/Ltr per Coat at above D.F.T.
PRECEDING COAT
None
SUCCEEDING COAT
Air Drying Epoxy Enamel, Epoxy Enamel HB, Epoxy MIO, Or any other recommended Finish Coat.
PERFORMANCE DATA
SHELF LIFE
6 Months in separate sealed packs at normal ambient Temperatures.
REMARKS
1. See note on Epoxy Compositions.
2. Stir the components well before mixing them in the specified ratio.
3. See note on Surface preparation for best performance on the coating system.
PACKING 20 Ltrs, 4 Ltrs and 1 Ltr.
Top