BLURAY ACRYLIC DISTEMPER

TYPE
Bluray Acrylic Distemper is water based interior wall paint. It gives aesthetically attractive long lasting matt finish.
FEATURES
Bluray Acrylic Distemper gives good durability and smooth finish. Due to the fast drying properties, quicker completion of painting job is possible. It is available in range of 200 brights, attractive shades that have excellent cleanliness.
RECOMMENDED APPLICATION
Bluray Acrylic Distemper is an interior wall finish that can be applied on all type of smooth plaster, fall ceiling, asbestos sheets, concrete etc.
PRODUCT TECHNICAL DATA
COLOURS
White & other shades as per shade cards
FINISH
Smooth and Matt
COVERAGE
On smooth primer masonry surface by brushing
1 coat: 18-20 sq. mtr/kg
2 coats: 9-11 sq mtr/kg
( It may vary due to factors such as methods and conditions during application and surface roughness etc.)
DRYING TIME
Surface drying time – 25-30 minutes
GLOSS LEVELS/SHEEN LEVELS
Matt
FLASH POINT (IS101/108 Part 1, Sec 9)
Non- flammable
SUITABILITY OF THINNER PAINT
Use within 24 hrs.
SHELF LIFE
3 years from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat.
PERFORMANCE DATA
ABRASION RESISTANCE
Good
WATER RESISTANCE
Good
REMARKS
a) Kindly refer to the MSDS for the Bluray Acrylic Distemper which gives detailed information on Safety measures while handling the paint.
b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire.
c) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water.
d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention.
e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling the paint.
f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system.
g) Do not apply when ambient temperature is less than 10ºC or if the temperature might drop to this level within 4 hrs of application.
h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use.
i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
APPLICATION METHOD
Product Thinner Dilution % by Vol Application Viscosity in Sec Recoating Period (Hrs)
Sand the surface with emery paper No.180 and wipe        
Bluray's Cement (Water or Solvent based) Wall Primer MTO or Water B- 8-10
S- 15-20
B-30-40
S-20-25
6-8 hrs
Bluray's Wall Putty Water Small amount of water flow   4-6 hrs
Sans the Surface with emery paper and Wipe        
Bluray's Cement (Water or Solvent based) Wall Primer MTO or Water B- 8-10
S- 15-20
B-30-40
S-20-25
6-8 hrs
Sand the surface with emery paper No. 320 and wipe        
Bluray's Acrylic Distemper by Brush, Spray, Roller Water B-55-60
S-50-55
B-20-25
S-25-35
3-4 hrs
Bluray's Acrylic Distemper by Brush, Spary, Roller Water B-55-60
S-50-55
B-20-25
S-25-35
3-4 hrs
(B=Brushing, S=Spraying)
Safety Features : Non-flammable
Pack Sizes: 1 KG, 2KG, 5KG, 10KG, 20KG.

Top