|
GENERIC TYPE : |
Two Component |
| |
| COMPOSITION : |
Aromatic Polyurethane based Clear or suitably
Pigmented Top Coat |
| |
| RECOMMENDED USE : |
Recommended for original equipment coating,
Hygienic, Maintenance coating where moderate chemical resistance
along with excellent abrasion resistance and decorative finish
are required. |
| |
|
PHYSICAL CONSTANTS : |
|
| |
| Color |
Assorted Shades
|
| Finish |
Glossy/Semi Glossy/Matt
|
| Solids by volume |
40% |
| Theoretical Spreading
Rate |
16.0 sq.mtr./ltr.
at 25 microns D.F.T. on smooth and non absorbent surface. |
| Flash Point |
Above 25 deg.
C. |
| Drying Characterstics
|
DRY TO TOUCH :
3 - 4 hrs. at 25°C.
DRY TO HANDLE : 24 hrs.
FULLY CURED : 7 days |
| Shelf Life |
9 months (of individual
component) - Stored under proper condition of temp.
& pressure. |
|
| |
| APPLICATION DETAIL: |
| |
| Mixing Ratio (BY
VOL.) |
Base : Hardner-
3 : 1 |
| Pot life |
6 - 8 hrs. at
25 deg. C. |
| Application method |
By Brush or By
Spray |
| Thinner |
Chemilac Thinner |
| Recommended dry
film Thickness |
25 microns |
| Overcoating interval
|
MIN : 8 hrs. MAX
: 24 days. |
| Compatibility
|
Can be top coated
Epoxy and Polyurethane,C.R., Top Coats. |
|
| |
| SURFACE PREPARATION : |
Please refer our directive sheet on surface
preparation. |
| |
|
| FILM PROPERTY CHEMICAL RESISTANCE : |
| |
| EXPOSURES-SPLASH
&SPILLAGE-FUMES |
| ACIDS
|
Good
|
VGood |
| ALKALITES
|
Fair |
Good |
| SOLVENTS
|
Good |
VGood |
| SALTS
|
VGood |
VGood |
| WATER
|
Good |
VGood |
|
|
| TEMPERATURE RESISTANCE
: |
CONTINUOUS : 93 deg. C.
INTERMITTENT : 120 deg.C. |
| WEATHERABILITY
: |
Good |
| FLEXIBILITY : |
Excellent |
| ABRASION RESISTANCE
: |
Excellent |
|
| NOTES : |
|
|
1. Do not apply when temperature falls below
10 deg. C. or rises above 50 deg. C. and when relative humidity
rises above 90%. Do not apply during rain, fog and mist.
2. Brushes and spray equipment should be cleaned with Chemilac's
Thinner otherwise equipment is liable to be damaged. |
| Pack size : |
20 Litres, 4 Litres |
