BLURAY AIR DRYING EPOXY ZINC RICH PRIMER

TYPE
Based on Epoxy Primer with heavy loading of Fine Zinc Dust.
FEATURES Excellent Primer for Structural steel having very high corrosion Resistance in Marine & Industrial Environments.
RECOMMENDED USE Suitable primer for Water Pipelines, Penstocks, Sluice Gates, Crest Gates etc., in Hydel Projects, Floating Roof Tanks, Structural Steel in
Docks, Refineries, Thermal Plants, Chemical Factories etc., Suitable as a weldable shop primer in ship building industry.
PRODUCT DATA 
COLOURS Grey
FINISH Smooth & Matt
DRYING Surface Dry : 90Minutes.
Hard Dry : Overnight
Track Free : 3-4 Hrs.
Over Coating : Overnight.
Full Cure : 7 Days
APPLICATION
MIXING RATIO
(BY VOLIUM)
BASE:HARDENER
   3    :      1
POT LIFE
(OF MIXTURE)
6 TO 8 Hrs
RECOMMENDED D.F.T. 40 Microns
SURFACE PREPARATION Sand or shot blasting to Sa 2 ½ Swedish Specification or equivalent.
APPLICATION By Brush or Air less Spray.
THINNER Not normally required. If required use ST-13
FLASH POINT Above 24 Deg.C
THEORITICAL
SPREDING RATE
10 Sq.M/Ltr per Coat at 40 Microns D.F.T.
PRECEDING COAT Nil
SUCCEEDING COAT Epoxy Enamel, Epoxy Enamel HB, Epoxy MIO, Chlorinated Rubber Paints Or any other recommended System
PERFORMANCE DATA
CORROSION RESISTANCE Excellent
SALT SPRAY RESISTANCE Excellent
SHELF LIFE 6 Months in separate sealed packs at normal ambient Temperatures.
REMARKS 1. See note on Epoxy Compositions.
2. Power stirring is recommended to get a uniform mixing.
3. Follow note on Surface Preparation for best performance.
4. Continues stirring is recommended while in use to get uniform coating
5. Proper Surface Preparation as mentioned above is a must to get the best result.
PACKING 4 Ltrs
Top