BLURAY AIR DRYING CHEMICAL RESISTANT EPOXY ENAMEL

TYPE
High Quality Pigments and Epoxy Resins cured with Adduct Hardener.
FEATURES To be used as a finish coat on Epoxy Primer for protection of steel structures, Concrete or Wood, Equipment, Tanks, Machinery etc., from corrosive atmosphere in chemical factories, Saline environments etc.
RECOMMENDED USE It is an ideal coating for Petrochemical units, Fertilizer, Sugar, Textile, Paper & other factories, Nuclear Establishments, Hydroelectric Projects, On shore and Off shore Installation. (For more information refer to Epoxy Compositions and their applications).
PRODUCT DATA 
COLOURS As per BLURAY’S High Performance Shade Card.
FINISH Smooth & Glossy
DRYING Surface Dry : 3-4
Hard Dry : Overnight
Over Coating : Overnight
Full Cure : 7 Days
APPLICATION
MIXING RATIO
(BY VOLIUM)
BASE:HARDENER
   3     :     1
MATURATION TIME 30 Minutes
POT LIFE
(OF MIXTURE)
6 TO 8 Hrs
RECOMMENDED D.F.T. 30-35 Microns
APPLICATION By Brush or Spray
THINNER Epoxy Thinner ST-13
FLASH POINT Above 26 Deg.C
THEORITICAL
SPREDING RATE
11.5 – 13.5 Sq.M/Ltr per Coat at above D.F.T.
(depending on shade)
PRECEDING COAT A suitable Epoxy Primer or Epoxy Zinc Rich Primer
SUCCEEDING COAT Generally none, Depends on specification.
PERFORMANCE DATA
SHELF LIFE 6 Months in separate sealed packs at normal ambient Temperatures.
REMARKS 1. See note on Epoxy Compositions.
2. Stir the components well before mixing them in the specified ratio.
3. Follow note on Surface Preparation for best performance of the coating System.
PACKING 20 Ltrs. 4 Ltrs and 1 Ltr.
Top