BLURAY PRIMER SURFACER

TYPE
Nitrocellulose resin based
FEATURES
Single pack quick drying glossy clear coat.
RECOMMENDED USE
This is designed to use as clear coat on basecoat. It is fast setting clear coatwith very good adhesion property on these surface. It has good mar proofness & goog hardness. Its final coat needs polishing to get a smooth & even finish with high gloss & durablity.
PRODUCT DATA 
COLOURS Clear Transparent
MIXING RATIO Single Pack
FINISH
Smooth, Glossy
RECOMMENDED DFT
15 - 25 micron
SURFACE PREPARATION All surface to be coated should be clean, dry & free from contamination. Oil & grease should be removed in accordance with SSPC-SP-1. Proper/suitable cleaning procedure should be followed depending up on the quality of the surface painted. For basecoats - Clean the surface to be painted, then apply this clear over it in two-three coats.
DRYING
1. Surface dry – 5 - 10 mins. 2. Dry to handle – 1 - 2 hrs. 3. Hard dry – o/n 4. Full cure – 7 days.
Flash Point
< 14°C
APPLICATION DATA
APPLICATON By Conventional Spray
PAINT PREPARATION Mix the content by suitable strirrer, add recommended thinner & mix this till homogenous. Strain the material through 300# mesh before application
RECOMMENDED THINNER NCT Thinner
THINNER INTAKE By Conventional spray - 10 - 40% by vol
APPLICATION VISCOSITY 18 (+ OR -)2 SEC BY FC B# 4AT 30°C
PERFORMANCE DATA (after Full cure as a system)
ADHESION
passes
SCRATCH HARDNESS
good
SHELF LIFE
6 months in a closed container at normal room temperature
PACKING
20Ltrs, 4 Ltrs, 1Ltr, 500ml,200ml
Top